Arcora BLANCUS 40 - 8.0 Common Faults and Solutions

9
8.0 Common faults and solutions
Fault
Cause Analysis
Solution
Machine can’t working
The power switch is not turned on
Please turn on the power
switch
The battery is low and needs to be
charged
Charge the battery
Battery damage
Replace the battery
Damaged power switch
Contact the manufacturer
The brush motor not run
The battery is low and needs to be
charged
Charge the battery
The brush motor is damaged or its
circuit is damaged
Contact the manufacturer
Solenoid switch damaged
Contact the manufacturer
Controller damage
Contact the manufacturer
The drive motor or its wiring is
damaged
Contact the manufacturer
Suction motor not
working
Suction motor or its circuit is
damaged
Contact the manufacturer
Poor water absorption
Wiper assembly clogged
Cleaning the Squeegee
Assembly
Squeegee blade wear
Turn over or replace
The suction pipe is not reliably
connected to the wiper assembly
Reliable connection of
suction pipe
Suction pipe clogged
Clear blockage
Damaged suction pipe
Replace the suction hose
Sewage tank cover is not closed
Covered
Damaged waste water tank cover
seal
Replace the seal
Suction motor damaged
Contact the manufacturer
Battery is low
Charge the battery
Short runtime
Damaged battery charger
Repair or replace the
charger