Arctic Air Go User Manual

1. Plug the large end of the included charging cable
into a power adapter or computer with a USB port.
2. Insert small end of cable into the back of
Arctic Air™ Go.
3. While charging, light will blink red – when fully
charged, light will remain solid red.
NOTE: Arctic Air™ Go requires approximately 90 min
to fully charge and will last for 5 hours.
FOR BEST RESULTS:
Pre-soak or freeze lter prior to use for a blast of cool air. To
avoid leaking, DO NOT position fan fully face down.
1. Flip up cap on top of Arctic Air™ Go and ll with water.
2. Press the button on front to turn on, and then again to
adjust fan speed.
Charging
Usage
2020-03-03 JML Artic Air Go Manual V03.indd 42020-03-03 JML Artic Air Go Manual V03.indd 4 10-04-20 09:2710-04-20 09:27

Arctic Air Go Specifications

General

Brand	Arctic Air
Model	Go
Category	Air Conditioner
Language	English