Arctic Air Tower+ - Page 3

12
12
D
D
D
D
D
C
C
C
C
C
ASSEMBLY
1. Place Arctic Aire Tower + down so that
the front grill is facing up while base is being
assembled.
2. Assemble the two Base halves by inserting the
tabs on one half into the slots on the other half.
3. Align the assembled Basewith the Arctic Aire
Tower+.Pull the Power Cordthrough the hole
in the center of the assembled Base.
4. InsertTowerPegs(C)into BaseSlots (D)
and turn the Baseclockwise (towards to the
LOCK symbol)until it locks in place.
5. Pull the excess slack of the Power Cord
through the hole. Plug the cord into a wall-outlet.
BASE
TOWER
10