Need help?Do you have a question about the Arctic Cat 1987 AFS Cougar and is the answer not in the manual?
General| Brand | Arctic Cat |
|---|---|
| Model | 1987 AFS Cougar |
| Category | Offroad Vehicle |
| Language | English |
Details technical specifications for the snowmobile models including engine and drive parameters.
Outlines the recommended procedure for breaking in new or overhauled A.F.S. model engines.
Lists detailed engine specifications for various Arctic Cat models, including bore, stroke, and compression ratio.
Provides a step-by-step guide for safely removing the engine from the snowmobile chassis.
Covers cleaning and inspecting critical engine parts like cylinder heads, pistons, crankcase, and crankshaft.
Provides methods and specifications for measuring critical engine components for wear and tolerance.
Provides instructions for reinstalling the engine into the snowmobile chassis.
Provides detailed carburetor specifications for various models and altitudes.
Explains how to adjust the carburetors for optimal engine performance.
Lists key specifications for the drive clutch, including part numbers and RPM ranges.
Covers removal, inspection, disassembly, bushing replacement, cleaning, inspection, assembly, and cam arm changes.
Covers removal, disassembly, cleaning, inspection, bearing replacement, and assembly of the driven pulley.
Covers removal, disassembly, assembly, installation, and adjustment of the brake system components.
Provides detailed electrical system specifications for various snowmobile models.
Outlines procedures for testing the ignition system to diagnose starting issues.
Details how to test main wiring harness and safety switches for continuity and proper function.
Describes methods to test the output of the ignition coil for proper spark generation.
Provides steps to test the output of the CDI unit for proper ignition system operation.
Provides resistance test values for various electrical components using a multitester.
Details how to check the engine's ignition timing using a timing light and tachometer.
Provides instructions for adjusting the ignition timing by rotating the stator plate.
Covers removal, disassembly, cleaning, inspecting, assembling, and installing the starter motor.
Includes wiring diagrams for both manual and electric start models.
Step-by-step instructions for removing the skid frame from specific snowmobile models.
Provides instructions for installing the skid frame onto the snowmobile tunnel.
Explains how to check and adjust the track tension for proper operation and wear.
Details the procedure for checking and adjusting track alignment for optimal performance.
Provides guidance for adjusting the suspension for rider preference and load conditions.
Provides torque specifications for common bolt sizes based on SAE grades for dry and lubricated conditions.
Lists specific torque values for engine bolts across different Arctic Cat models.
Illustrates recommended torque patterns for tightening cylinder head, cylinder base, and crankcase bolts.
Diagnoses and provides remedies for common engine issues like no spark, no fuel, or overheating.
Addresses troubleshooting for fuel system issues, particularly carburetor-related problems.
To Next Page