Arctic Cat 700 H1 EFI User Manual

FOREWORD
This Arctic Cat Service Manual contains service, maintenance, and troubleshooting information for certain 2008
Arctic Cat ATV models (see cover). The complete manual is designed to aid service personnel in service-oriented
applications.
Arctic Cat offers additional publications (when they become available) to aid in servicing other ATV models. To
service models not included in this manual, please refer to the following publications:
• 2008 Y-12 Service Manual
• 2008 DVX/Utility 250 Service Manual
• 2008 366 Service Manual
• 2008 DVX 400 Service Manual
• 2008 700 Diesel Service Manual
• 2008 Thundercat Service Manual
This manual is divided into sections. Each section covers a specific ATV component or system and, in addition to
the standard service procedures, includes disassembling, inspecting, and assembling instructions. When using this
manual as a guide, the technician should use discretion as to how much disassembly is needed to correct any given
condition.
The service technician should become familiar with the operation and construction of each component or system
by carefully studying the complete manual. This manual will assist the service technician in becoming more aware
of and efficient with servicing procedures. Such efficiency not only helps build consumer confidence but also saves
time and labor.
All Arctic Cat ATV publications and decals display the words Warning, Caution, Note, and At This Point to
emphasize important information. The symbol ! WARNING identifies personal safety-related information.
Be sure to follow the directive because it deals with the possibility of severe personal injury or even death. The
symbol ! CAUTION identifies unsafe practices which may result in ATV-related damage. Follow the direc-
tive because it deals with the possibility of damaging part or parts of the ATV. The symbol  NOTE: identifies
supplementary information worthy of particular attention. The symbol

AT THIS POINT directs the tech-
nician to certain and specific procedures to promote efficiency and to improve clarity.
At the time of publication, all information, photographs, and illustrations were technically correct. Some photo-
graphs used in this manual are used for clarity purposes only and are not designed to depict actual conditions.
Because Arctic Cat Inc. constantly refines and improves its products, no retroactive obligation is incurred.
All materials and specifications are subject to change without notice.
Keep this manual accessible in the shop area for reference.
Product Service and
Warranty Department
Arctic Cat Inc.
© 2007 Arctic Cat Inc. July 2007
®™ Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701
Back to TOC
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com

Arctic Cat 700 H1 EFI Specifications

General

Brand	Arctic Cat
Model	700 H1 EFI
Category	Offroad Vehicle
Language	English

Summary

General Information and Specifications

General Specifications

Detailed specifications for various Arctic Cat ATV models, including chassis and miscellany.

Torque Specifications

Lists torque values for different components and fasteners across various models.

Break-In Procedure

Guidelines for the initial break-in period of a new or overhauled ATV engine.

Recommended Engine Oil

Specifications and recommendations for Arctic Cat ATV engine oil.

Recommended Differential/Rear Drive Lubricant

Specifications and recommendations for front differential and rear drive lubricants.

Periodic Maintenance

Periodic Maintenance Chart

A schedule detailing inspection, cleaning, lubrication, and replacement intervals for ATV components.

Battery Maintenance and Charging

Air Filter Service Procedures

Step-by-step guide for removing, inspecting, cleaning, and installing the air filter element.

Valve/Tappet Clearance Adjustment

Procedures for checking and adjusting valve/tappet clearance using feeler gauges and adjuster screws.

Engine Compression Testing Procedure

Method for testing engine compression to diagnose potential performance issues.

Spark Plug Inspection and Service

Throttle Cable and Idle RPM Adjustment

Engine Oil, Filter, and Strainer Change

Steps for changing engine oil, replacing the oil filter, and servicing the oil strainer.

Front/Rear Drive Lubricant Service

Procedure for checking and changing differential and rear drive lubricants.

Clutch Adjustment (Manual Transmission)

Steps for adjusting the clutch on 400/500 manual transmission models.

Steering Component Inspection

Shift Lever Adjustment

Hydraulic Brake System Bleeding

Procedure to bleed air from the hydraulic brake system for optimal performance.

Brake Pad Maintenance

Checking brake pad thickness, replacing worn pads, and burnishing new pads.

V-Belt Inspection and Replacement

Differential Lock Cable Adjustment