Need help?Do you have a question about the Arctic Cat ZR6000 2016 and is the answer not in the manual?
Lists parts and conditions not covered by the Arctic Cat warranty.
Details actions and circumstances that will invalidate the snowmobile warranty.
Provides critical safety advice for operating the snowmobile to prevent injury.
Covers key safety rules like avoiding alcohol and wearing helmets.
Highlights hazard awareness, machine checks, and environmental considerations.
Specifies the correct octane and ethanol content for snowmobile fuel.
Identifies the specific Arctic Cat oil for the engine's injection system.
Details the recommended break-in procedure for the 6000 series engine.
Details the recommended break-in procedure for 4000/8000 series engines.
Lists error codes for engine management and their troubleshooting implications.
Provides critical warnings regarding battery handling and jump-starting.
Step-by-step guide for safely connecting jumper cables for jump-starting.
Recommendations and warnings for installing track studs.
Instructions on how to engage and operate the reverse function.
Step-by-step guide for installing track studs with proper template usage.
Explains indicators, warnings, and proper usage for reverse operation.
Explains the APV system's operation and the recommended engine oil.
Describes low/high RPM operation and potential issues like sticking valves.
An overview of regular maintenance checks and their recommended intervals.
How to check and fill the oil tank for different models.
How to install, check, and interpret spark plug condition for proper operation.
Procedure to ensure proper cable tension for the Arctic Power Valve system.
Steps for battery removal, cleaning, and charging procedures.
Utilizes charts and procedures for charging batteries with different voltage levels.
Emphasizes the importance of daily inspection of the brake system.
Procedure for checking and filling the brake fluid reservoir.
Steps for releasing air and fluid from the brake lines for proper function.
Procedures for inspecting pad wear and replacement.
Details on the emission warranty, period, and covered components.
Lists parts and conditions not covered by the Arctic Cat warranty.
Details actions and circumstances that will invalidate the snowmobile warranty.
Provides critical safety advice for operating the snowmobile to prevent injury.
Covers key safety rules like avoiding alcohol and wearing helmets.
Highlights hazard awareness, machine checks, and environmental considerations.
Specifies the correct octane and ethanol content for snowmobile fuel.
Identifies the specific Arctic Cat oil for the engine's injection system.
Details the recommended break-in procedure for the 6000 series engine.
Details the recommended break-in procedure for 4000/8000 series engines.
Lists error codes for engine management and their troubleshooting implications.
Provides critical warnings regarding battery handling and jump-starting.
Step-by-step guide for safely connecting jumper cables for jump-starting.
Recommendations and warnings for installing track studs.
Instructions on how to engage and operate the reverse function.
Step-by-step guide for installing track studs with proper template usage.
Explains indicators, warnings, and proper usage for reverse operation.
Explains the APV system's operation and the recommended engine oil.
Describes low/high RPM operation and potential issues like sticking valves.
An overview of regular maintenance checks and their recommended intervals.
How to check and fill the oil tank for different models.
How to install, check, and interpret spark plug condition for proper operation.
Procedure to ensure proper cable tension for the Arctic Power Valve system.
Steps for battery removal, cleaning, and charging procedures.
Utilizes charts and procedures for charging batteries with different voltage levels.
Emphasizes the importance of daily inspection of the brake system.
Procedure for checking and filling the brake fluid reservoir.
Steps for releasing air and fluid from the brake lines for proper function.
Procedures for inspecting pad wear and replacement.
Details on the emission warranty, period, and covered components.
General| Engine Type | 2-stroke |
|---|---|
| Displacement | 599 cc |
| Cooling | Liquid |
| Horsepower | 125 HP |
| Fuel System | Electronic Fuel Injection (EFI) |
| Starter | Electric |
| Rear Suspension | SLIDE-ACTION |
| Track Width | 15 inches |
| Track | Ripsaw II |
| Dry Weight | 475 lbs |
| Width | 48 inches |
| Bore x Stroke | 73.8 mm x 70 mm |
| Front Suspension | ARS |
| Ski Stance | 42-43 inches (Adjustable) |
| Track Length | 129 inches |
| Brake | Hydraulic |
| Length | 120 inches |
| Features | digital/analog gauge |
To Next Page