Need help?Do you have a question about the Arctic Cat 2015 ZR 6000 and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Cylinders | 2 |
| Cooling System | Liquid |
| Starter | Electric |
| Brake Type | Hydraulic Disc |
| Engine Displacement | 599cc |
| Horsepower | 125 HP |
| Fuel System | Electronic Fuel Injection (EFI) |
| Front Shocks | Fox Float |
| Rear Suspension | Slide-Action |
| Rear Travel | 13.5 in. (34.3 cm) |
| Track Width | 15 inches |
| Fuel Capacity | 11.5 gallons |
Safety warnings regarding snowmobile operation, emphasizing reading the manual and using common sense.
Procedure for breaking in a new or rebuilt Arctic Cat engine, including throttle usage and maintenance checks.
Instructions for breaking in a new drive belt to ensure proper flexibility and longevity.
Explanation of different speedometer/tachometer styles and indicator icons used on Arctic Cat snowmobiles.
List of diagnostic trouble codes for the 6000 series engine, with corresponding descriptions.
List of diagnostic trouble codes for the 8000 series engine, with corresponding descriptions.
Step-by-step guide for safely jump-starting a snowmobile with a dead battery, including warnings and precautions.
Information on keeping drive and driven clutches clean and the need for professional servicing.
Step-by-step guide for starting and stopping the engine, including pre-operation checks and safety precautions.
Instructions for checking brake fluid level and condition, and adding fluid if necessary.
Describes various methods for stopping the snowmobile, including emergency stop switches and throttle monitor.
Explanation of the throttle monitor switch's safety function and troubleshooting steps for malfunctions.
Procedure for checking and adjusting the APV system cables to ensure proper exhaust port operation.
Instructions for checking brake fluid level and condition, and adding Arctic Cat approved fluid.
Steps for bleeding the brake system to remove air and restore firm brake lever feel.
Procedure for checking brake pad condition and replacing them, emphasizing paired replacement.
Procedure to check and adjust drive belt deflection to ensure optimal performance and belt life.
Procedure for checking track tension and deflection, emphasizing safety during checks.
Steps for adjusting track tension using idler wheel axle screws and adjusting bolts for proper fit.
Procedure for checking rear idler wheel alignment relative to inner track drive lugs.
Steps for adjusting track alignment by rotating adjusting bolts, ensuring proper tension is maintained.
Tips on drive belt fit, deflection, and maintenance to optimize snowmobile performance.
Procedure for checking and adjusting drive belt deflection using shims to ensure proper operation.
Details on the emission warranty period, covered components, and owner responsibilities for maintenance.
To Next Page
