SAFETY PRECAUTIONS ...................................................................1
IDENTIFICATION OF PARTS ...........................................................3
INSTALLATION INSTRUCTIONS .....................................................5
CARE AND MAINTENANCE ............................................................10
AIR CONDITIONER FEATURES .......................................................11
OPERATING INSTRUCTIONS ..........................................................12
TROUBLESHOOTING .......................................................................14
CONTENTS
This manual provides the information needed for proper use and maintenance
of this air conditioner. Basic preventative care can help extend the life of this
unit. The “Troubleshooting” section in this manual contains a chart with
solutions to the most common problems. Referring to this section may save
time and prevent the need for a service call in the event of a problem.
NOTE: The rating data indicated on the energy label is based on the testing condition of installing the
un-extended air exhaust duct without at mouth, round mouth, and wall exhaust adapters. (The duct
and the adapters are listed in the accessories chart of this Instruction Manual.)
ENERGY SAVING TIPS
• Use the unit in the recommended room size.
• Locate the unit where furniture cannot obstruct the air ow.
• Keep blinds/curtains closed during the sunniest part of the day (cooling mode).
• Keep the lters clean.
• Keep doors and windows closed to keep cool air in and warm air out (cooling mode) or keep warm air in and cool air
out (heating mode for units with heat function).
N
OTE: All the illustrations in this manual are for explanation purposes only. Unit purchased may be slightly different.
The design and specifications are subject to change without prior notice for product improvement. Contact Consumer
Services at (844-472-2473) for details.
OPERATING CONDITIONS
The air conditioner must be operated within the temperature range indicated below:
MODE ROOM TEMPERATURE
COOL 62°F (17°C) – 95°F (35°C)
DRY 55°F (13°C) – 95°F (35°C)
NOTE: Performance may be
reduced outside of these
operating temperatures.