Need help?Do you have a question about the Arctic Z Pro and is the answer not in the manual?
General| Construction Material | Steel |
|---|---|
| Color | Black |
| VESA compatibility | 200x200mm - 600x400mm |
| Max. weight capacity | 50 kg (110 lbs) |
| Load Capacity | 88 lbs (40 kg) |
Steps for removing the monitor from the bracket, including using a socket head M4 screw and hex key.
Attaching the adjustment bracket to the main arm using components.
Placing a washer onto the arm assembly during installation.
Securing the washer collar onto the arm assembly.
Further assembly steps for the monitor arm, showing component placement.
Using screws, caps, washers, and axle to secure the monitor arm components.
Hanging the monitor onto the arm and fastening it with socket head screws.
Instructions on using the hex key to detach the existing monitor head.
Guidance on loosening or tightening screws to adjust monitor tilt and rotation.
Instructions on how to properly level the monitor on the arm.
Information about the two-year limited warranty for the ARCTIC product.
Recommendations for safe installation, including needing two people and verifying desk support.
To Next Page