We do the utmost to ensure that the provided informaon is complete and accurate; however, images and
specicaons are subject to change without noce. Visit our website at www.ardaappliances.com
for the latest version of this manual.
- 2 -
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY,
PLEASE OBSERVE THE FOLLOWING:
1. Installaon and electrical work must be done by a qualied TECHNICIAN in
accordance with all applicable codes and standards.
2. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or a similarly qualied person to avoid a hazard. Any
modicaons that may be required to the home’s electrical system for the
installaon of the range hood must only be made by qualied electricians.
3. Before servicing or cleaning unit, switch power o at the service panel.
Lock panel to prevent power from being switched on accidentally.
4. Use this unit only in the manner intended by the manufacturer.
5. Sucient air is needed for combuson and exhausng of gases through the
chimney of fuel burning equipment to prevent back draing. Follow the
heang equipment manufacturer’s guidelines and safety standards such as
those published by the Naonal Fire Protecon Associaon (NFPA), and the
American Society for Heang, Refrigeraon and Air Condioning Engineers
(ASHRAE), and the local code authories.
6. When cung or drilling into wall or ceiling, be careful NOT to Damage
exisng electrical wiring and other hidden ulies.
7. Ducted fans must always be vented to the outdoors.
8. To reduce the risk of re, use only metal ductwork.
9. This unit must be grounded.
!
To Next Page