ARDETEM DIP 506 - Default Chapter; Table of Contents

p1
Technical manual DIP506
Summary
Technical manual DIP506
Summary
1 . INTRODUCTION P2
2 . SPACE REQUIREMENTS P3
3 .
CONNECTINGS P3
4 . PROGRAMMING P4
4.1 Communicating with the instrument p4
4.2 Oritentation through the programming p5
4.3 Main menu p5
4.4 Programming menu p6
4.4.1 Input programming p6
4.4.2 Display programming p7
4.5 Input features and programming limits p11
4.6 Output features and programming limits p11
4.6.1 Analog output p11
4.6.2 Digital output p12
4.6.3 Relay output p12
4.6.4 Safeties p13
4.6.5 Display features p13
4.7 Instrument configuration p15
4.8 Reading of the configuration p16
4.9 Access code p16
4.10 New programming p16
4.11 Functions accessible in the main menu p17
4.11.1 Display simulation p17
4.11.2 Analog output simulation p17
4.11.3Menu : Clear .Deleting of the recorded alarms p17
4.11.4 Menu : t.tare p17
4.11.5 Menu ClrM deleting of the min and Max values p18
4.11.6 Menu Inf Display of the min value p18
4.11.7 Display of the Max. sup value p18
5.1 Other functions p18
5.1 Visualisation of the direct mesasure p18
5.2 Visualisation and adjusting of the alarm setpoints p18
5.3 Automatic setting p19
6. APPLICATION EXAMPLES P20
7. ERROR MESSAGES P20
8. GENERAL WARRANTY CONDITIONS P20
9. LEXIQUE P20
10. MODBUS ANNEXE P24