To Next PageTo Next Page
Need help?Do you have a question about the ARDETEM DIP 10 and is the answer not in the manual?
General| Brand | ARDETEM |
|---|---|
| Model | DIP 10 |
| Category | Measuring Instruments |
| Language | English |
Diagrams show how to connect process, temperature, resistance, outputs, and power supply.
Details the configuration for process signals, including input type and calibration settings.
Guides the setup for temperature inputs, covering sensor types and compensation.
Explains the programming for resistive sensors, including calibration and linearization.
Covers the configuration of the analog output's down and full scales.
Explains how display values correspond to the analog output scales.
Guides the setup for relay setpoints, hysteresis, and operating modes.
Details the configuration of time delays for relays and the status of associated LEDs.
Describes how the instrument handles self-diagnosis errors and their reporting.
Explains the configuration for detecting sensor rupture and its impact on outputs.
Specifies the characteristics and programming of the analog output (current or voltage).
Describes the different operating modes for the relay outputs (setpoint, window).
Explains how to record alarms and display custom alarm messages.
Explains how the meter reports self-diagnosis errors and their corresponding codes.
Details the management of sensor rupture detection and its impact on outputs.
