Arduino Nano 33 BLE Rev2 User Manual

Arduino® Nano 33 BLE Rev2
4 / 14 Arduino® Nano 33 BLE Rev2 Modified: 27/02/2024
1 The Board
As all Nano form factor boards, Nano 33 BLE Rev2 does not have a battery charger but can be powered through
USB or headers.
NOTE: Nano 33 BLE Rev2 only supports 3.3 V I/Os and is NOT 5V tolerant so please make sure you are not directly
connecting 5 V signals to this board or it will be damaged. Also, as opposed to other Arduino Nano boards that
support 5 V operation, the 5V pin does NOT supply voltage but is rather connected, through a jumper, to the USB
power input.
1.1 Ratings
1.1.1 Recommended Operating Conditions
Symbol Description Min Max
Conservative thermal limits for the whole board: -40 °C ( 40 °F) 85 °C ( 185 °F)
1.2 Power Consumption
Symbol Description Min Typ Max Unit
PBL Power consumption with busy loop TBC mW
PLP Power consumption in low power mode TBC mW
PMAX Maximum Power Consumption TBC mW

Arduino Nano 33 BLE Rev2 Specifications

General

Brand	Arduino
Model	Nano 33 BLE Rev2
Category	Control Unit
Language	English