Arduino Nicla Vision - Page 11

Arduino® Nicla Vision
11 / 23 Arduino® Nicla Vision Modified: 16/10/2024
Ref. Description Ref. Description
DL2 KPHHS-1005SURCK 0402 SMD red LED J1 ADC, SPI and LPIO pin headers
J2 I2C, JTAG, Power and LPIO pin headers J3 Battery connection pin headers
M1 GC2145 2 Megapixel CMOS Camera
Back View
Nicla Vision Back View
Ref. Description Ref. Description
U2,U7
LM66100DCKR Low-IQ Ideal Diode 5.5 V, 1.5 A, 79
mΩ
U3
LSM6DSOXTR 6-axis IMU with Embedded ML
Core
U8 SE050C2HQ1/Z01SDZ IoT Secure Element IC U11
TXB0108YZPR 8-bit bidirectional voltage-level
translator
U12
NTS0304EUKZ 4-bit dual-supply translating
transceiver with open-drain
U19
MAX17262REWL+T 5.2 µA 1-Cell fuel gauge with
internal current sensing
L3
MLF1608C330KTD00 33 µH shielded multilayer
inductor, 2 mA, 2.2 Ohm max, 0603 surface-
mount
D1
PRTR5V0U2F,115 bidirectional TVS diode array,
2-channel ESD protection for high-speed data
lines
Y1
SiT1532AI-J4-DCC-32.768E 32.768 kHz XO
(Standard) LVCMOS MEMS oscillator
J4
BM03B-ACHSS-GAN-TF(LF)(SN) 3-pin battery
connector, 1.2mm pitch, wire-to-board, surface-
mount