ARE LSX - Step 2: Positioning the Tonneau Cover; Applying Protective Tapes to Rails; Cover Placement and Prop Assist Arm

Dunnage
Return dunnage to A.R.E.
10
Remove clamps and retain for later use.
4mm Hex Tool
Clamp Bodies
11
12
Step 2: Positioning
13
Cut tape at end cap.
Rail End Cap
14
Place protective masking tape at both front corners.
(Will be removed later)
15
Masking Tape
Apply paper backed cap tape to hinge base toward the
outside edge.
Mylar
Backed
Cap Tape
Apply cap tape to both side rails. Tape should butt, not overlap.
Remove paper from cap tape.
Tie WrapProp Assist Arm
17
Once tonneau is set into place, cut prop assist arm tie wraps.
Unlock and unlatch palm handle. Raise tonneau, close Ttailgate
and position side rails on bed rails.
Palm Handle Lock/Latch
Side Rail
Tailgate
LSX Tonneau Cover
18
With tailgate open and using 4 individuals, place tonneau
cover onto truck bed rails.
16