This document is the original user manual for the AREBOS SPA Pool, providing comprehensive information on its safety, installation, operation, maintenance, and disposal.
Function Description:
The AREBOS SPA Pool is an inflatable hot tub designed for private use, offering relaxation and hydrotherapy. It features a heating system, a filter pump for water circulation and purification, and an air blower for a jet/bubble massage system. Some models also include LED lighting for enhanced ambiance. The spa is designed to be easily inflatable and portable, suitable for both indoor and outdoor use, provided the installation guidelines are followed.
Important Technical Specifications:
The manual details various SPA Pool types with different models (CORFU, PALMA, TENERIFE, SANTORINI, BALI, MONACO, FLORENCE, GRANADA, BARCELONA, ROME, BERGEN, VENICE), each having specific dimensions and capacities.
Key specifications include:
- Engine Power (heater): 1800 W for all models.
- Engine Power (air blower): 600 W for all models.
- Power Supply: AC 220-240V / 50Hz.
- Filter Pump Power: 12 V / 30 W for all models.
- Flow Rate: 1400 l/h for all models.
- Temperature Increasing Rate: 1.0-2.0°C / hour for all models.
- Cable Length: 5 m for all models.
- User Capacity/Seating Capacity: Varies from 2 persons (BERGEN) to 6 persons (TENERIFE, SANTORINI).
- Max. Water Capacity: Ranges from 550L (BERGEN) to 1000L (SANTORINI).
- Temperature Range: 20°C - 40°C for all models.
- Number of Massage Jets: Varies from 90 (BERGEN) to 130 (TENERIFE, SANTORINI).
- Pool Size (external): Ranges from 154x154cm (CORFU, MONACO) to Ø208cm (SANTORINI).
- Pool Size (internal): Ranges from 114X114cm (CORFU, MONACO) to Ø168cm (SANTORINI).
- Height of the Pool: 65cm for all models.
- Form: Includes square, round, oval, and octagonal shapes.
- Net Weight: Varies from 22 kg (CORFU, PALMA, BERGEN) to 26 kg (TENERIFE, SANTORINI).
The device is built according to current safety regulations and includes a residual current device (RCCB) for electrical safety.
Usage Features:
- Installation: Requires a stable, horizontal surface capable of bearing at least 360 kg/m², with a functional drainage system. The spa should not be exposed to direct sunlight for prolonged periods to prevent deformation.
- Inflation: The spa is inflated using the BUBBLE button on the control panel. It should be inflated until the upper edge can be pressed in by approximately 4-5 cm.
- LED Lighting (where applicable): Models with LED lighting require the LED strip to be inserted into tabs at the bottom of the pool, facing the base. The lighting is controlled by a remote, offering different colors, brightness, and modes.
- Water Filling: Fill with fresh tap water to the marked level. Do not overfill. Seawater or salt water should not be used.
- Control Panel: Features buttons for FILTER (ON/OFF filter system), BUBBLE (ON/OFF jet system), HEATER (ON/OFF heating system), and SET TEMP (temperature adjustment).
- Heating System: Operates between 20-40°C. The heating system automatically activates the filter pump. It may take 12-24 hours to reach the desired temperature, depending on ambient and mains water temperature.
- Jet System: The bubble system runs for 20 minutes automatically and can be restarted after a 10-minute wait.
- Safety Precautions: Emphasizes child safety (supervision, covers), electrical safety (grounding, no extension cords, qualified electrician for repairs), and health risks (water temperature limits, advice for pregnant women and individuals with health conditions, no alcohol/drugs during use). Hyperthermia risks are detailed. The pool should not be operated below 4°C or in the rain.
Maintenance Features:
- Draining: Water can be drained using a submersible pump or by unscrewing the end cap of the water outlet and attaching a filling hose. The BUBBLE button can be pressed for 2-3 minutes to drain water from the air line.
- Filter Cartridge: Needs to be checked and cleaned after each use. It should be changed every 3 days or when dirty/discolored. Used filters can be cleaned in an empty dishwasher or washing machine (in a pillowcase/towel).
- Water Treatment: Regular checking of pH (7.2-7.8), free chlorine (3-5 ppm), and total alkalinity (80-120 mg/l) is crucial. Water treatment products (chlorine granules/tablets, pH plus/minus granules) should be added to the middle of the pool with air jets and heater on. A dosing float should be used for chemicals.
- Cleaning the Pool: Clean with soap, water, a damp cloth, and a soft brush. Avoid hard brushes or abrasive products.
- Repairs: Small holes or punctures can be repaired using supplied patches and adhesive.
- Winter Storage: Drain all water, remove the filter cartridge, clean and dry the spa, expel all air, and fold loosely. Store in a dry, frost-free place. Improper storage in sub-zero temperatures can damage the pool and invalidate the warranty.
- Troubleshooting: The manual provides a detailed troubleshooting guide for common issues such as non-working jet/bubble or heating systems, noisy filter pump, air leakage, water leakage, deformation, unclean water, and LED light malfunctions. Error codes (HL, SH, FC, SL) are explained with corresponding solutions, including checking water flow, cleaning filters, and contacting customer service. A manual reset button is available for overheating protection.
The document concludes with environmentally friendly disposal instructions for the product and packaging, as well as contact information for customer service and the EU Declaration of Conformity.
To Next Page
General