6
4 Packaging - Handling - Storage
4.1 Transport - Delivery
The conditions and methods of
transport are defined with the
customer, at the time of processing
the contract. Packaging is
dependent on the conditions of
transport, storage and the nature of
the product being transported.
Certain circuit breakers are
supplied strapped inside the
Functional Unit, in the withdrawn/
test" position.
4.2 Packaging for the circuit breakers
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄ
Circuit breaker road and rail
packaging:
- attached to a wooden pallet,
- enveloped in plastic stretch
wrapping,
- protection of the front face
by expanded polystyrene.
Circuit breaker air and sea
packaging:
- under a heat-sealed cover
with bags of desiccant,
- enclosed in a wooden case.
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
ËËË
Status of the equipment on
delivery:
- Circuit breaker "tripped",
- Mechanical control"Released".
4.3 Packaging for the Circuit Breaker" moving part
For all shipments by air, the SF6
gas pressure is lowered to 0.5
relative bar. A refilling and pressure
adjustment kit is delivered with the
device.
For all shipments by air, reset
the SF6 circuit breaker to its
rated pressure before the first
mechanical operation test.
The circuit breaker must
remain on its base, within its
original packaging during any
eventual storage period and until it
arrives at the location of its
installation.
To Next Page
Loading...
