To Next PageTo Next Page
Need help?Do you have a question about the Areva S2DA and is the answer not in the manual?
General| Operating Mechanism | Spring-operated mechanism |
|---|---|
| Rated Lightning Impulse Withstand Voltage | 95 kV |
| Rated Power Frequency Withstand Voltage | 38 kV |
| Mechanical Endurance | 10, 000 operations |
| Standards | IEC 62271-100 |
Details critical safety protocols and potential hazards identified by icons and warnings.
Outlines general safety procedures for operators, installation, commissioning, and maintenance personnel.
Provides a general overview of the S2DA/S2DAT disconnector series, its design, and compliance with standards.
Describes the types of packaging used, ensuring protection against damage and weather during transit.
Explains the division of disconnector parts into shipping units for simpler handling and installation.
Instructions for inspecting delivered crates for damage and completeness upon arrival.
Guidelines for proper short-term and long-term storage of the equipment to maintain its condition.
Pre-installation requirements, consulting specific drawings, and preparing contact surfaces.
Details on mounting support structures onto concrete pillars.
Step-by-step guide for installing the S2DA disconnector components.
Step-by-step guide for installing the S2DAT disconnector with earthing switch.
Procedures for fine-tuning and adjusting the S2DA/S2DAT disconnector for optimal performance.
Steps for safely disconnecting and disassembling the disconnector unit.
Steps for disassembling equipment and replacing key parts.
