3
Whenever the humidity level is
higher than 95 %, we recommend
that you take appropriate corrective
measures. For any assistance or
advice, contact the AREVA After-
Sales Department (See § 1.1).
Whenever the humidity level is
higher than 75%, we recommend
that you take appropriate corrective
measures
for which AREVA can offer you the
necessary assistance.Please do
not hesitate to contact us.
2.4 Particular instructions for operation and intervention with energized equipment
When commissioning and
operating the equipment under
normal conditions, the General
safety instructions for electrical
applications must be respected,
(protective gloves, insulating stool,
etc.), as well as the operating
instructions.
All manipulations must be
completed once started.
The durations for carrying out the
operations mentioned in the
maintenance tables are given
purely as an indication and depend
on the conditions on-site.
2.5 Other technical notices to be consulted
AMTNoT003-02Fluokit M24 Installation - Commissioning - Operation - Maintenance
AMTNoT017-02BLR-BLRM Control mechanisms Operation - Maintenance
AMTNoT090-02Fluokit M24+ Installation - Commissioning - Operation - Maintenance
2.6 Tools and products (not supplied) required for the operations described in this notice
- Cutter
- Crowbar
- Open-ended spanners: 10; 13; 16; 17;18; 19 & 30 mm
- Ratchet spanner + 150mm extension with sockets of 10; 13; 16; 17 mm
- Flat headed screwdriver
- Allen keys for hexagonal screws size 5
- Torque wrench
- Flat-nose pliers
- Hand drill +drill bit Ø6 mm
- Tape measure
- Hammer + Pin punch
- Rule
- Clean, dry cloth
- Solvent (di-electric resistance > 30kV), excluding chlorine based products
- Mechanical grease Mobilplex 47, Mobilux EP3 from Mobil or
Stabilube T6 by Sophos
- Loctite 262 thread lock
Product code
01
C
262
To Next Page
Loading...
