Argo APOLLO User Manual

17
CONNECT APOLLO TO TUYASMART APP
1. Click on
“Add device”
4. After allowing the App to access
the position according to the
desired data, select the Wi-Fi
network to which you want to
connect Apollo and enter the
network password where the unit
is installed, then click on “Next”
xxxx1111
(ESEMPIO)
2. In the left bar select
“Large Home Appliance”
3. In the right area select “”
“Air Conditioner”
the App.

Argo APOLLO Specifications

General

Brand	Argo
Model	APOLLO
Category	Air Conditioner
Language	English