DESCRIPTION OF PARTS
2. Carbon fiber heating elements
3. Handle
5. Anti-tip device
HOW TO USE THE CARBON FIBER HEATER
Position the unit on a flat, stable surface.
When you move the appliance, use the handle.
Stand the appliance up vertically on a level surface before switching on.
Connect the power cord to a suitable electric socket (230V~/50Hz).
Place the selection knob in the desired position: ECO “ON” (400 W) or COMFORT “ON” (800 W).
Rotate the knob on ECO “SWING” or COMFORT “SWING” to make the appliance swing automatically, shifting the air
flow from left to right.
Place the knob on OFF position to stop the heater operating.
The appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the product is inclined.
Do not position the appliance on its side or upside down.
To Next Page
Loading...
