V 01/21
24
2. Slide the flat fitting downwards into the grooves (A) and secure it with the hook on top (B).
Open the windows and lock one of the two leaves with the handle. Place the end fitting against the fixed leaf of the
window,and draw the other leaf towards it
.
USE WITH WINDOW UNIT KIT
1. To make the hole in the glass it is advisable to take
the porthole kit accessory to the glazier.
2. Insert the window unit into the window.
3. Insert the round fitting into the retractable flexible pipe and
insert the latter with its round fitting into the window unit
without the plug..
4. The outlet must be between 40 cm and 130 cm above the ground. Avoid tight curves or bends in the flexible hose.
To Next Page
Loading...
Need help?
General
