Need help?Do you have a question about the Argo Ulisse 10 AUR101CL and is the answer not in the manual?
General| Cooling Capacity | 10000 BTU/h |
|---|---|
| Energy efficiency class (cooling) | A |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 16-35°C |
| Cooling power | 2930 W |
| Energy Efficiency Ratio (Cooling) | 2.6 |
| Power Consumption (Cooling) | 1.1 kW |
| Weight (Indoor Unit) | 8 kg |
| Power Consumption | 915 W |
| Noise Level (Outdoor) | 50 dB |
Details specifications for different unit models, including performance, electrical ratings, features, and dimensions.
Lists specifications for major components like controller, fan motor, compressor, and safety devices.
Explains the operational logic of compressor, outdoor fan, and indoor fan in Cool Mode.
Explains the operational logic of compressor, outdoor fan, and indoor fan in Heat Mode.
Explains automatic switching between cooling and heating modes to maintain room temperature.
Details the unit's operation in Dry Mode for humidity reduction with minimal temperature drop.
Protection to prevent ice formation on the indoor coil in low ambient temperatures.
Protection to prevent high pressure buildup at the outdoor coil during cooling operation.
Describes the Ice Detection Algorithm (IDA) for de-icing the outdoor coil in heat pump mode.
Protection against high pressure buildup at the indoor coil during heating operation.
Controls indoor fan speed to prevent cold drafts until the indoor coil is warm.
Troubleshooting steps for when the air conditioner fails to operate.
Describes the alarm signal (blinking lamp) indicating a defective thermistor (sensor).
Lists the refrigerant charge capacities for different models and extension kits.
Instructions for measuring insulation resistance of power supply wires and indoor unit parts.
Procedure to check the continuity of fuses on the PCB assembly using a multimeter.
Method for testing the condition of compressor and fan motor capacitors.
To Next Page
