14
V 12/16
DESCRIPTION OF PARTS
1. Button
2. Blade
3. Function display window
4. CD grain decorative sheet
5. Front shell
6. Water level display window
7. Universal casters
8. Handle
9. Remote repository
10. Back shell
11. Air filter
12. Reel
13. Power cord
14. Water tank
15. Casters
16. Tank lock
HOW TO USE THE APPLIANCE
The appliance does not need to be installed.
Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): the appliance
can be switched on using the ON/OFF button. The unit can be switched off using the OFF button and you will hear a
sound.
When you move it, use the handle on the back. Do not use this cooler in an area with high humidity, rich in dust or with a
temperature above 40 ° C.
This product can be used either as a fan, with 4 modes (Normal, Natural, Sleep and Smart) and 3 fan speed options (low,
medium and high), or as a cooler/humidifier: in this case the rear tank should be filled with demineralized water, up to but
not exceeding the maximum level as indicated. When the water in the tank falls below the minimum level, marked on the
tank, the appliance emits a continuous sound for a few seconds to signal a low water level, then cooling mode is stopped.
The unit automatically shuts down when the tank is removed.
The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly
humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes
part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes
it feel as though the temperature has dropped.
To Next Page
Loading...
Need help?
General
