19
V 06/18
HOW TO USE THE FAN HEATER
Connect the power cable to a suitable electric socket (220-240V~50Hz), as indicated in the data plate.
SWITCHING THE FAN HEATER ON
Press the button on the appliance to switch the fan heater to stand-by mode. Press the
on the remote control
to switch the appliance ON.
AUTOMATIC FLAP SWIVEL
Press the button on the control panel or on the remote control to select the operating mode.
ACTIVATION OF SUMMER VENTILATION (FAN) AND HEATING (ECO – COMFORT) MODES
Press the button on the control panel or on the remote control to select the operating mode.
In stand-by mode the LED display is the following:
In Summer ventilation (FAN) mode the LED display is the following
In ECO heating mode (1000 W) the LED display is the following:
In COMFORT heating mode (2000 W) the LED display is the following:
To return to stand-by mode press the buttons or again respectively on the appliance and on the remote control.
The default set temperature is 23°C.
The fan heater switches off about 30 seconds after the stand-by mode has been activated.
TEMPERATURE REGULATION
The temperature can only be set via the remote control. Press the + or – buttons to regulate the desired temperature (from
10°C to 49°C). If you set the temperature to 25°C the “°C” LED comes on as shown in the figure:
Press to cancel the temperature setting.
ECO SMART FUNCTION
The fan heater operates at maximum power (COMFORT mode) when the set temperature is at least 4°C higher than the
room temperature; if the set temperature is 0-2°C higher than the room temperature, the fan heater operates at medium power
(ECO mode), if the room temperature is higher than the set temperature the fan heater switches off and starts operating again
when the room temperature drops 2°C below the set temperature.
ON/OFF DAILY TIMER SETTING
In stand-by mode, press the button to set the switch-on timer. The switch-on timer can be set from 1 to 12 hours, by
pressing on the same button to move on in intervals of 1 h: the default set temperature when it switches on is 23°C.
When the appliance is operating, to set the switch-off timer press the button; the switch-off button can be set from 1 to 12
hours, by pressing on the same button to move on in intervals of 1 h.
To Next Page
Loading...
