12V 07/22
do not let bare skin touch hot surfaces.
• Ensure that all objects are at least 1 meter from the front and sides of
the appliance.
• Disconnect the mains power when the appliance is not used or for
cleaning operations.
• Avoid using the carbon ber heater in dusty environments or in the
presence of inammable vapors (e.g. in workshops or garages) or
paint vapors.
• Do not place anything on the appliance, use the appliance to dry
clothing.
• Use the appliance in a well-ventilated area.
• Avoid placing ngers or foreign objects in the air inlet/outlet grilles, as
this may lead to electric shock or re and may damage the appliance.
• To avoid the risk of re, do not block the grilles or tamper with them in
any way while the carbon ber heater operates.
• Do not use the appliance if the cord or plug are damaged. If the
power cable is damaged, it must be replaced by the manufacturer or
its technical assistance service or in any case by a person with a similar
qualication, in order to prevent any risk.
• If the power supply cord is damaged, it must be replaced by the
manufacturer, dealer or a similarly qualied person so as to avoid any
safety risks.
• Do not operate the appliance if it has fallen from a height or has
suffered damage in any way. Contact qualied technical personnel to
examine the appliance or perform any electrical or mechanical repairs.
• The most common cause of overheating is the build-up of dust in the
appliance. Remove dust deposits by unplugging the appliance and
cleaning the air outlets and grilles with the aid of a vacuum cleaner.
• Do not use abrasive detergents for cleaning this appliance. Clean the
appliance with the aid of a damp (not wet) cloth rinsed in hot soapy
water. Always remove the plug from the mains socket before cleaning.
• To disconnect the carbon ber heater, push the switch to OFF and
remove the plug from the socket. Pull on the plug only. Avoid pulling on
the cord when disconnecting the carbon ber heater.
• Do not place any objects on the cord and do not bend it.
• It is not advisable to use extension cords, as these may overheat and
To Next Page
Loading...