As you cycle through the play modes using Mode , iNet6+ shows
a splash screen for each mode. After one second, iNet6+enters
the selected mode and tries to start playing the last station or
track that was playing in that mode. If this is not possible, iNet6+
tries to connect to the selected source by scanning for stations,
networks, or prompting for user input as appropriate.
Now playing screens show information about the audio source
and track now playing, where available.
Dialogue screens are shown to allow the user to change
settings. They vary in complexity from simple Yes/No options up
to the scrollable network password input screen.
As with menus, the selected item is shown with a white
background.
Dialogue screens mark the current setting with an asterisk (*).
To Next Page
Loading...
