argon audio Stream2 - Troubleshooting and Error Messages; Error Messages

www.argonaudio.com
Stream 2
74
10. Troubleshooting and error messages
10.1 Error messages
Message
Description
Example
Failed to connect Correct key entered, but
router rejects request
MAC filtering enabled on router
Format error
Cannot recognise file format -
independent of network
Received .wma, but found that the
stream wasn’t WMA when trying to
decode
Network error
Problem past router -
incorrect data being received
from network
Data obtained from server is
unreadable.
Network not ready Problem with connection to
router
Router switched off
Network timeout
Problem past router - no
response being received from
network
Streaming IR station and suddenly
station becomes unavailable
No UPnP media found No UPnP servers found
Unauthorised
Access not granted by UPnP
server
Allow access for Stream2 in UPnP
server settings
Update failed Software upgrade failed