Assembly Instructions
Assembly Instructions
Stage 4 – Finishing the UnitStage 3 – Fitting the Mirror
fig. 8
fig. 6
fig. 9
fig. 7
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
WARNING: Do not strike the
glass with hard or pointed items.
Do not sit or stand on the glass surface,
as this will cause a hazard.
When cleaning the glass use a damp cloth
or chamois leather with washing up liquid.
Do not use washing powders or any other
substances containing abrasives since
these substances will scratch the glass.
It is essential that this unit be fixed to a
wall with the fixings provided.
NOTE: It would be useful to ask
someone to help you at this
stage.
CAUTION: When handling
glass always take extra care.
Ensure no children are in the assembly
area.
1. Insert the Glass Supports E into
the tubes.
See fig. 6.
1. Carefully place the Glass Shelf A
onto the unit.
See fig. 8.
2. Use Covers F, Rubber Washers
D and Plastic Washers E to fix
the Mirror B onto the unit.
See fig. 7.
E
E
A
F
D
B
NOTE: Before use always make
sure the unit is secure.
D
E
E
To Next Page
Loading...
