This document provides assembly instructions and care advice for a range of "Mix and Match" furniture items, specifically chests and bedside units. The products are designed to be assembled by the user, with clear guidance provided for each step.

Function Description:

The manual covers the assembly of two primary furniture types: a 1-door bedside unit and a 3-drawer chest. These units are designed for storage, likely in a bedroom setting, offering surfaces for items and enclosed spaces for organization. The bedside unit features a single door, allowing access to an internal compartment. The chest, on the other hand, provides three drawers for more compartmentalized storage. The "Mix and Match" aspect suggests that these units might be part of a larger furniture collection, allowing users to combine them to suit their needs.

Important Technical Specifications:

The manual provides specific dimensions for both the chest and the bedside unit:

Chest Dimensions:
- Width: 75cm
- Depth: 36cm
- Height: 57.5cm
Bedside Dimensions:
- Width: 38.5cm
- Depth: 36cm
- Height: 41.5cm

The units are noted to be heavy, with a warning that they weigh approximately 21kgs, emphasizing the need for careful lifting. The components list includes various panels and fittings, such as wooden dowels, metal dowels, screws (40mm, 25mm, 13mm), locking nuts (small and large), nails, drawer stops, runners, hinge plates, hinges, and handles. The handles come in two variations: blue/pink for white units and silver for beech units, indicating color options for the furniture. The document also specifies part numbers for each component, which are useful for identifying damaged or missing parts when contacting customer service.

Usage Features:

The assembly process is broken down into sequential steps, starting with preparing individual panels and then combining them.

Door Bedside Unit (Steps 1-14):
- Door Opening Direction: Users can choose whether the door opens to the left or right during assembly by fitting hinge plates accordingly.
- Secure Assembly: The instructions emphasize securing components with screws and dowels, ensuring a sturdy structure.
- Back Panel: The back panel is nailed to the unit, and specific instructions are given to ensure the unit is square before nailing to prevent misalignment.
- Door Adjustment: After assembly, instructions are provided for adjusting the door's height, forward/back position, and sideways alignment using screws on the hinges. This allows for fine-tuning to ensure the door closes properly and looks even.
- Door Stop: A door stop is pushed into a hole in the base to prevent the door from swinging too far inward.
3-Drawer Chest (Steps 15-25):
- Drawer Assembly: Detailed steps are given for assembling the drawers, including fitting metal dowels, small locking nuts, drawer bases into wraps, and attaching drawer fronts.
- Drawer Stops and Runners: Drawer stops are fitted to the drawer wraps, and runners are attached to the side panels of the chest, ensuring smooth operation and preventing drawers from being pulled out completely.
- Handle Attachment: Handles are attached to the drawer fronts using screws, with a caution not to overtighten.
- Back Panel: Similar to the bedside unit, the chest's back panel is nailed, with an emphasis on squaring the unit beforehand.
- Drawer Insertion: The final step involves inserting the assembled drawers into the chest, noting that they need to be lifted slightly to overcome the 'stop' system.
- Smooth Drawer Operation: A tip is provided to spray furniture polish into the grooves of the drawers to ensure they run smoothly.

Maintenance Features:

The manual includes a "Care and maintenance" section with practical advice:

Cleaning: Only a damp cloth and mild detergent should be used for cleaning. Bleach or abrasive cleaners are explicitly prohibited to prevent damage to the unit's finish.
Screw Checks: Users are advised to periodically check for and tighten any loose screws to maintain the unit's stability and integrity over time.
Disposal: The product should not be discarded with household waste but taken to a local authority waste disposal center, promoting environmentally responsible disposal.

General Safety and Assembly Advice:

Several important safety and assembly tips are provided:

Lifting: Due to the weight (approx. 21kgs), careful lifting is recommended.
Component Check: Users should verify all components and tools are present before starting.
Fittings Organization: Fittings should be removed from plastic bags and separated into groups for easier identification.
Child and Animal Safety: Keep children and animals away from the work area due to small parts that could pose a choking hazard.
Two-Person Assembly: Some parts of the assembly will be easier with two people.
Work Area: Ensure sufficient space to lay out parts.
Product Handling: Do not stand or put weight on the products to avoid damage.
Assembly Location: Assemble items as close to their final position as possible.
Surface Protection: Assemble on a soft, level surface (e.g., an opened unit carton) to prevent damage to the units or the floor.
Power Tools: The use of power drill/drivers for inserting screws is not recommended as it can damage the units; only hand screwdrivers should be used. An electric drill can be used for drilling holes but not for fitting screws.
Wall Securing: A safety note advises securing the units to a wall using suitable fixings (not supplied) if there's a risk of them being pulled over, especially by children.
Packaging Disposal: Dispose of all packaging carefully and responsibly.
Customer Helpline: A customer helpline number (08456 400800) is provided for assistance with damaged or missing parts, requiring reference numbers from the component pages.
Ruler: A ruler is included on one page to help correctly identify screws.

Argos Mix - Attaching Base and Plinth

Related product manuals