Argos Pazzaz - Fitting the Front Wheel; Preparing Brakes and Securing the Front Wheel

6
TOOLS NEEDED
SPANNER
i
ii
B
Turn the bike upside down. Remove the nuts on the front
wheel axle by turning an-clockwise and remove the
locking washers. Then sit the wheel in the fork as shown.
4.- FITTING THE FRONT WHEEL
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE
A
Before fing the front wheel, you must open the
brake arms by releasing the brake cable:
Pull rubber cable protector to the right so you
can see the brake cable inside it. Squeeze
brake arms together.
Pull the noodle out by moving it le then up
and out of the metal housing