Argos Washington - Assembly Steps; Step 1: Left Side Panel Preparation

Assembly Instructions
5
Step 1
Finished
front edge
a:
b:
c:
a: Press the Nylon plug S
firmly into left side 1.
Screw 8.5 mm locking
screw J into left side 1.
Note: Insert 8.5mm locking
screw J as far as shown.
Do not over tighten.
Press the double nylon plug
P firmly into left side 1.
Screw hinge back Y onto
left side 1.
b: Attach hanger rail
support Q using
screw E onto left side 1.
Finished
front edge
c: Screw 24mm locking
screw A into left side 1.
Note: Insert 24mm locking
screw A as far as shown.
Do not over tighten.
A
Finished
front edge
S
S
P
J
J
Y
Y
Y
J
Y
A
A
A
Q
E
P
Warning: Do not use an electric screwdriver to attach the
hinges as this can weaken the fixing.
1
1
1