Argus DCM-099 User Manual

11
Changing Resolution
You can toggle the resolution setting of the camera between
“High Resolution Mode” and “Low Resolution Mode”. The
camera is set to “High Resolution Mode” by default. To
change to “Low Resolution Mode”, press the MODE button
until you see “ ” and press the shutter button to confirm.
To change back into "High Resolution", press the MODE
button until you see “ ” and press the shutter button to
confirm.
Changing Frequency
Modify the anti-flicker frequency if you decide to take photos
in rooms with fluorescent light bulbs. To switch to 50Hz,
press the MODE button until the LCD screen displays “ ”
and then shutter button to confirm. To switch back to 60Hz,
press the MODE button until the LCD screen displays “ ”
and then shutter button to confirm.

Argus DCM-099 Specifications

Camera

camera resolution	640 x 480 (VGA), 320 x 240 (QVGA)
shutter speed	1/6-1/15000 seconds

Lens

lens type	Non-spherical Lens
aperture	1: 2.6
focus	f=5.4 mm

Image

image variation	0.5m –infinity

Power

power supply	AAA Battery
power supply via USB	from computer

Ports & interfaces

interface	USB port