8
Before Using The Camera
Open the battery compartment in the back of the camera.
Place one AAA battery. Close the compartment and press
the MODE button. The number 25 will appear on the LCD
screen indicating that it is ready to take 25 "high-resolution"
pictures . The LCD screen will flash when the battery is low.
Note: Do not change the battery until after you connect the
camera to a computer. Otherwise the previously taken
photographs will be erased.
Important Note: We strongly recommend that you do not
use rechargeable batteries in order
not to affect the performance of your camera.
To Next Page
Loading...
Need help?
Camera
Lens
Power
Ports & interfaces
