Assembling Instruction Sullivan Entry Cabinet 70"
Step 1 - Install Right Side Panel (2R)
A
B
E
Attach Right Side Panel (2R) to the Bottom Cabinet (1) and
lock it using Hex Screw M6 x 40 (B) with Ring (A) from
bottom and outside lower side, then tight firmly by turning
clock wise using Hex Key (E).
2R
1
Step 2 - Install Large Backpanel (5)
5
Insert Large Backpanel (5) into
the groove and push to the side.
Step 3 - Install Middle Panel (3)
3
Cabinet Part
= Bottom Cabinet
(1 pc)
1 =
= Left Side Panel
(1 pc)
2L =
= Hex Screw M6 x 40
(16 pcs)
B =
= Ring
(14 pcs)
A =
Hardware Kit
= Hex Key
(2 pcs)
E =
= Shelf Support
(12 pcs)
F =
= Right Side Panel
(1 pc)
2R =
= Middle Panel
(1 pc)
3 =
= Large Backpanel
(1 pc)
5 =
= Top Shelf
(1 pc)
6 =
= Top Backpanel
(1 pc)
7 =
= Adjustable Shelf
(3 pcs)
8 =
=Small Backpanel
(1 pc)
4 =
= Cushion
(1 pc)
9 =
B
E
D
Install Hanger Holder (D) and lock it using
Hex Screw M6 x 40 (B), then tight firmly
by turning clock wise using Hex Key (E).
3
Attach the two Hex Screw M6 x 50 (C)
on Middle Panel (3). Then install
Middle Panel (3) to the cabinet.
= Hanger Holder
(4 pcs)
D =
= Hex Screw M6 x 50
(2 pcs)
C =
C
G =
=Anti Tip Kit
(1 set)
Assembly Tips :
1. Please identify and check all parts and hardware before
assembling.
2. Please read and follow each instructions step by step.
3. It is recommended that this item should be assembled by
two adults.
!
To Next Page
Loading...