GB - 6
OPERATOR ZONE
This unit is designed to be operated by one
person located in the operator zone
(see
figure 3).
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.
SAFETY RULES
If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any
needed safety training before operation.
Only the user can prevent and is responsible
for accidents or injuries occurring to
themselves, other people or property.
Read, understand, and follow all instructions
in the manual and on the machine before
starting.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an Emergency
ALWAYS remove spark plug wire from spark
plug before inspecting or working on this unit.
Inspect unit before each use for: missing or
damaged decals and shields. Replace or
repair as needed.
Before starting engine ensure that control
lever is in neutral position.
Keep children, people, and pets away. Be
alert and shut off unit if anyone enters work
area. Keep children under watchful care of a
responsible adult.
NEVER allow children to operate or play on
or near unit.
Keep operator zone clear of all split logs and
debris.
Operate unit only when there is sufficient light
to clearly see work area.
Only trained adults may operate unit. Training
includes being familiar with controls and
actual operation.
Many accidents occur when more than one
person operates the log splitter. If a helper is
assisting in loading logs to be split, never
operate the controls until the helper is clear of
the area.
NEVER operate unit after or during the use of
medication, drugs or alcohol.
NEVER allow anyone to operate this unit
when their alertness or coordination is
impaired.
Wear adequate safety shoes and protective
gloves.
DO NOT wear loose clothing or jewelry and
tie back hair that may get caught in moving
parts.
Protect eyes, face and head from objects that
may be thrown from unit. Wear appropriate
hearing protection. Always wear safety
goggles or safety glasses with side shields
when operating.
ALWAYS keep hands away from all moving
parts during operation. Moving parts can cut
or crush body parts.
ALWAYS keep hands away from all pinch
points.
Operate unit only when standing in operator
zone. Unit stabilizers must be extended
before starting unit.
Figure 3
Horizontal Operating Position
Vertical Operating Position
Operator
Zone
Operator
Zone
Operator
Zone
To Next Page
Loading...
Need help?
General
