To Next PageTo Next PageHow to fix Ariens 911330- LM21SW Lawn Mower engine that will not start?
If the Ariens Lawn Mower engine won't start, first check the fuel level and fill the tank if it's low. Then, ensure the spark plug wire is securely connected. Finally, inspect the engine/blade control cable for any detachment, breakage, or improper adjustment; adjust, repair, or replace it as necessary.
What to do if Ariens 911330- LM21SW engine is difficult to restart?
If the Ariens Lawn Mower engine is hard to restart, the mower might be clogged with grass. Clear the clippings from underneath the mower, and consider allowing the mower to clear clippings before shutting off the engine in the future.
What to do if Ariens 911330- LM21SW does not bag clippings?
If your Ariens Lawn Mower isn't bagging clippings, the grass bag might be overfilled. Empty it and avoid overfilling in the future. Also, check if the mulching plug is installed and remove it.
Why does grass not disperse evenly with Ariens 911330- LM21SW Lawn Mower?
If your Ariens Lawn Mower isn't dispersing grass evenly, it could be due to removing too much grass per cutting; try raising the cutting height. Also, ensure the grass is dry before mowing. Mowing slower might also help.
Why is the cut poor with my Ariens Lawn Mower?
General| Cutting Width | 21 inches |
|---|---|
| Cutting Height Positions | 7 |
| Drive Type | Self-Propelled |
| Start Type | Recoil |
| Deck Material | Steel |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge | Yes |
| Oil Capacity | 20 oz |
| Engine Power | 6.75 ft-lbs |
| Wheel Size | 8 in (front) / 11 in (rear) |
| Fuel Tank Capacity | 0.5 gallons |
Symbols and signal words indicating safety precautions and potential hazards.
Explains the function and safety checks of the engine/blade control mechanism.
How to engage and disengage the wheel drive for self-propelled operation.
Details how to set the desired grass cutting height for the mower.
Step-by-step guide for safely adding fuel to the mower's tank.
Procedures for safely starting and stopping the mower's engine.
Verifies the engine/blade control stops the engine within 3 seconds upon release.
Ensures the unit stops quickly and completely when the wheel drive control is released.
Emphasizes maintaining the correct engine oil level for proper operation and preventing damage.
Details the schedule and importance of changing engine oil and filter for mower longevity.
