EasyManua.ls Logo

Ariens 911396 - User Manual

Ariens 911396
30 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner/Operator Manual
Models
911086 - LM21
911102 - PRO21SCH
911330 - LM21SW
911396 - PRO21SW
911514 - LM21S
911525 - LM21SW
911531 - LM21S
911532 - LM21
911533 - LM21S
911534 - LM21SW
Walk Behind Lawn Mower
01250000C 4/05
Printed in USA
Transfer
model &
serial number
label from
product
registration
here.
Coller l’autocollant du
modèle et du numéro de
série dans cet encadré.
Transferir aquí la etiqueta
del modelo y número de
serie del registro del
producto.
ENGLISH
FRANÇAIS
ESPAGNOL

Table of Contents

Questions and Answers

  • C
    Cynthia RussellAug 9, 2025
    Why won't my Ariens Lawn Mower engine start?
    • M
      Melanie MitchellAug 9, 2025
      Your Ariens Lawn Mower engine might not start due to several reasons. It could be that the fuel tank is empty or low, so check the fuel level and fill the tank if needed. Another possible cause is a closed fuel shutoff valve; make sure it's open. Also, inspect the spark plug wire to ensure it's properly connected. The throttle control might not be in the correct position, so adjust it to the FAST position. Finally, the engine/blade control cable could be detached, broken, or improperly adjusted; check, adjust, repair, or replace it as necessary.
  • J
    James SmithAug 14, 2025
    What to do if my Ariens 911396 Lawn Mower engine is hard to restart?
    • M
      Melanie FritzSep 12, 2025
      If your Ariens Lawn Mower engine is difficult to restart, it might be due to the mower being clogged with grass. Clear the clippings from under the mower. To prevent this, allow the mower to clear clippings before shutting off the engine.
  • B
    Brandy PerezAug 19, 2025
    Why does my Ariens 911396 Lawn Mower not disperse grass evenly?
    • A
      Audrey RobinsonAug 19, 2025
      Uneven grass dispersal from your Ariens Lawn Mower can occur for a few reasons. If you're removing too much grass per cutting, try raising the cutting height. Also, if the grass is too wet, allow it to dry before mowing. Mowing too fast can also cause this issue, so try mowing slower.
  • B
    brownkerryAug 25, 2025
    Why isn't my Ariens Lawn Mower bagging clippings?
    • M
      Megan MoralesAug 25, 2025
      If your Ariens Lawn Mower isn't bagging clippings, it could be that the grass bag is overfilled; empty the grass bag and avoid overfilling it. Another reason could be that the mulching plug is installed; remove the mulching plug to enable bagging.
  • C
    colemankeithAug 29, 2025
    What to do if the wheel drive doesn't engage on my Ariens Lawn Mower?
    • A
      apottsAug 29, 2025
      If the wheel drive on your self-propelled Ariens Lawn Mower isn't engaging, there are several things to check. First, make sure the wheel drive control is engaged. Inspect the drive belt to ensure it's in the correct position. If the belt is worn or damaged, it will need to be replaced. Also, verify that the rear wheels are set at the same cutting height. Other potential issues include a detached idler spring, a detached or broken wheel drive control cable, a friction disc that is not adjusted properly or is damaged, damaged bearings or debris in the gear set. For assistance with the idler spring, friction disc, bearings, or gear set, contact your dealer.
  • A
    Angela BurnettSep 3, 2025
    How to improve a poor cut with my Ariens 911396?
    • J
      Jonathan MaciasSep 4, 2025
      If your Ariens Lawn Mower is providing a poor cut, consider these factors: the blade may be worn (refer to the CHECK MOWER BLADE section on page 17 for inspection instructions). Also, if you are removing too much grass per cutting, raise the cutting height. If the grass is too wet, allow it to dry before mowing. Finally, if your mowing speed is too fast, slow down.

Ariens 911396 Specifications

General IconGeneral
Engine Type4-Cycle
Starting SystemRecoil
Deck MaterialSteel
Cutting WidthNot Applicable
SpeedsNot Applicable
Cutting HeightNot Applicable
Fuel Tank CapacityNot Applicable

Related product manuals