To Next PageTo Next PageWhy is my Ariens Lawn Mower engine running rough?
If your Ariens Lawn Mower engine is running rough, first check if the choke is engaged and disengage it. Another common cause is a plugged air filter cartridge, which should be cleaned or replaced. If the problem persists, it may be due to a faulty engine, and you should contact your Ariens Dealer.
What to do if my Ariens Lawn Mower doesn't move when steering levers are engaged?
If your Ariens Lawn Mower doesn't move when using the steering levers while the engine is running, first check if the transmission bypass lever is engaged and disengage it. A faulty hydrostatic belt could also be the issue, requiring replacement. If neither of these resolves the problem, the transmission may be faulty, and you should contact your Ariens Dealer.
Why doesn't my Ariens 915165 travel in a straight line?
If your Ariens Lawn Mower doesn't travel in a straight line, start by checking the tire pressure. If the tire pressure is correct, the steering levers may need adjustment. If the issue persists, the hydrostatic transmission and/or linkage may need adjustment, and you should contact your Ariens Dealer.
What to do if Ariens 915165 Lawn Mower hour meter continues when engine not running?
If the hour meter on your Ariens Lawn Mower continues to run when the engine is off, it's likely because the ignition key is in the run position. Turn the ignition key to the off position.
Why Ariens 915165 does not travel in a straight line?
If your Ariens Lawn Mower isn't traveling in a straight line, possible causes include: * Incorrect tire pressure. Check the tire pressure. * Steering levers need adjustment. Adjust the steering levers. * Hydrostatic transmission and/or linkage needs adjustment.
What causes an Ariens 915165 engine to overheat?
If your Ariens Lawn Mower engine overheats, start by checking the engine oil level and add oil if it's low. Also, the cooling system might be plugged, requiring cleaning. If the issue persists, the engine itself may be faulty, and you should contact your Ariens Dealer.
General| Brand | Ariens |
|---|---|
| Model | 915165 |
| Category | Lawn Mower |
| Language | English |
Guidance on understanding safety, controls, and maintenance for unit operation.
Refers to a separate manual for engine-specific service recommendations.
Explains where to find unit and engine model and serial numbers for service.
Details the importance of product registration for warranty claims and service information.
Explains symbols used to highlight important personal safety precautions and warnings.
Provides general reference information for proper operation and maintenance practices.
Advises on always replacing missing or damaged safety decals, referring to figure for locations.
Lists necessary tools for unit assembly, including wrenches and grease.
Instructions for removing the unit and components from the shipping container.
Steps for connecting the unit's battery, referencing other sections.
Guides on setting up the unit for operation, including seat and steering lever adjustments.
Instructions for correctly positioning the discharge chute for safe operation.
Explains how to use the throttle lever to control engine speed for starting and running.
Details the use of the choke lever for starting a cold engine and smooth running.
Describes how to engage and disengage the parking brake for safety and operation.
Explains how to engage and disengage the mower blades using the PTO switch.
Outlines the four positions of the ignition switch for starting, running, and stopping the engine.
Describes the functions of the hour meter for tracking engine run time and service alerts.
How to move backward by pulling steering levers.
How to move forward by pushing steering levers.
How to turn by manipulating steering levers individually or in combination.
Steps to open the mower deck access plate for maintenance or inspection.
Instructions on how to open and close the unit's hood.
Detailed procedure for removing and installing mower blades, including safety precautions.
Specifies measurements for blade height at lowest and highest cutting positions.
Details the required forward pitch measurement for mower blades.
Step-by-step guide for safely removing and installing the unit's battery.
Procedures for cleaning battery terminals and cables for optimal connection.
How to adjust the height of the steering levers for operator comfort.
How to adjust the width or spacing of the steering levers.
Instructions for adding the correct type and amount of hydraulic fluid to the system.
Guidelines for cleaning and storing the unit for short periods.
Procedures for preparing the unit for extended storage, including battery and fuel system care.
Details special extensions to the standard warranty period for specific components.
Lists items and conditions not covered by the warranty, including wear items and misuse.
Outlines customer duties, such as product registration and performing maintenance.
