Need help?Do you have a question about the Ariens 920027 and is the answer not in the manual?
General| Engine | LCT Storm Force 291cc |
|---|---|
| Clearing Height | 21 in |
| Drive System | Disc-O-Matic |
| Weight | 254 lbs |
| Drive Type | Wheel Drive |
| Impeller Diameter | 12 in |
| Engine Type | 4-Cycle |
| Clearing Height (in) | 21 in |
| Intake Height (in) | 21 in |
| Auger Material | Steel |
| Forward Speeds | 6 |
| Reverse Speeds | 2 |
| Electric Start | Yes |
| Skid Shoes | Yes |
| Speed | 6 Forward / 2 Reverse |
| Number of Speeds | 6 Forward / 2 Reverse |
| Chute Control | Manual |
Emphasizes reading manuals, understanding controls, and seeking training.
Read and understand manual, controls, and stopping procedures. Train all operators.
Safe practices for handling, storing, and fueling gasoline, including ventilation.
Rules for safe operation, avoiding moving parts, hot surfaces, and proper discharge.
Diagram and list identifying all controls and features of the snow thrower.
Steps to immediately stop the engine and all moving parts.
Detailed instructions for electric and recoil start, including fuel and choke settings.
Selecting speed, engaging clutches, and preparing for snow clearing.
Safe procedure using clean-out tool to remove obstructions from discharge chute.
Procedure for checking auger gearcase oil level and recommended lubricant.
How to adjust the scraper blade and the importance of skid shoe adjustment.
Procedure for adjusting skid shoes based on surface type.
Instructions for replacing shear bolts using recommended OEM parts.
Adjusting the traction clutch to compensate for friction disc wear.
Procedure to adjust the speed selector for correct forward and reverse travel.
Steps to remove slack from the attachment clutch cable for proper engagement.
Checking and adjusting track tension for proper unit movement and tracking.
Procedure for adjusting the height-adjustment cable for proper auger housing control.
Common causes and corrections for the engine failing to start.
Troubleshooting for engines that start hard, run poorly, or stop unexpectedly.
Resolving problems with the unit not driving forward or in reverse.
Diagnosing and fixing issues with the unit not throwing snow or throwing it poorly.
Addressing problems where excessive snow is left behind after clearing.
Detailed technical specifications for each model, including dimensions and weight.
To Next Page
