Need help?Do you have a question about the Ariens 920026 and is the answer not in the manual?
General| Type | Two-stage |
|---|---|
| Clearing Width | 24 inches |
| Intake Height | 21 inches |
| Starting System | Electric Start |
| Speeds | 6 forward / 2 reverse |
| Impeller Diameter | 12 inches |
| Chute Control | Remote |
| Engine | 208cc |
| Skid Shoes | Steel, Adjustable |
| Tire Size | 13 x 4 inches |
Understand safety alert symbols and signal words for hazard identification.
Explanation of specific safety decals and their meanings for safe operation.
Instructions for safe operation, familiarization with controls, and pre-operation checks.
Safe procedures for handling, storing, and refueling with gasoline.
Wear appropriate clothing, safety glasses, gloves, and footwear for safe operation.
Safe steps to clear a clogged discharge chute using the clean-out tool.
Procedure to quickly stop the engine and all moving parts in an emergency.
Step-by-step guide for starting the engine using electric or recoil start methods.
Engaging clutches, selecting speed, and adjusting chute for operation.
Adjusting the scraper blade for optimal snow clearing and housing protection.
Setting skid shoes for proper ground clearance and surface protection.
Procedure for replacing shear bolts to protect the auger and gearcase.
Aligning the pivot pin for correct forward and reverse speed engagement.
Adjusting the attachment clutch for proper auger/impeller stop time and brake function.
Adjusting traction clutch for proper drive engagement and compensating for wear.
Adjusting track tension for proper deflection and unit tracking.
Adjusting the height adjustment cable for proper engagement and slack.
Diagnosing and correcting issues with the engine not starting or starting poorly.
Troubleshooting engine stopping, brief running, or poor performance.
Resolving issues with unit not driving forward/reverse or speed selector not working.
Addressing problems with not throwing snow or throwing it poorly.
To Next Page
