EasyManua.ls Logo

Ariens 920014 COMPACT 24 LE - User Manual

Ariens 920014 COMPACT 24 LE
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
Models
920013 – Compact 22 LE
(Serial No. 35000 and up)
920014 – Compact 24 LE
(Serial No. 35000 and up)
920 Series
Sno-Thro
®
04335600C 11/11
Printed in USA
ENGLISH
FRANÇAIS
Gasoline containing up to 10% ethanol (E10) or up to 10% MTBE (methyl tertiary butyl ether)
is acceptable for use in this machine.
The use of any gasoline exceeding 10% ethanol (E10) or 10% MTBE will void the product
warranty.
Il est possible d’utiliser de l’essence contenant jusqu’à 10% d’éthanol (E10) ou 10% de
MTBE (éther méthyl-tertiobutylique) sur cette machine.
L’utilisation d’une essence contenant plus de 10% d’éthanol (E10) ou de 10% de MTBE
annulent la garantie
.

Questions and Answers

  • J
    Justin McleanJul 31, 2025
    Why won't my Ariens 920014 COMPACT 24 LE engine crank or start?
    • S
      stephanie95Jul 31, 2025
      Your Ariens Snow Blower might not crank or start due to several reasons: * The fuel tank could be empty, in which case you should fill it. * The fuel shut-off valve might be closed; open it. * There might be a buildup of dirt and residue around the governor/carburetor; clean this area. * The key switch may not be in the run position; put it in the run position. * The electric starter could be malfunctioning; check the starter and its connections.
  • D
    Daniel FlynnAug 6, 2025
    Why is my Ariens 920014 COMPACT 24 LE Snow Blower not throwing snow?
    • A
      Alexandria WilsonAug 6, 2025
      If your Ariens Snow Blower isn't throwing snow, here's what might be happening: * The shear bolts may be broken; replace them. * The attachment clutch/brake might not be adjusted properly; adjust it. * The auger could be frozen in place; move the unit to a warm place to thaw it. * Ice or debris might be obstructing the auger; with the engine off and auger disengaged, check for and remove any obstructions. * The attachment drive belt might be slipping, worn, or damaged; adjust or replace it.
  • M
    Mason LeonAug 12, 2025
    What causes small rubber beads to collect in the frame of my Ariens 920014 COMPACT 24 LE Snow Blower?
    • M
      Michael JonesAug 12, 2025
      Small rubber beads collecting in the frame of your Ariens Snow Blower are typically due to normal friction disc wear. If you notice chunks or large pieces of rubber, it indicates that the friction disc should be checked and replaced if necessary.
  • A
    Angela Torres MDAug 19, 2025
    What to do if my Ariens Snow Blower engine stops?
    • G
      Gregory BurtonAug 19, 2025
      If your Ariens Snow Blower engine stops, consider the following: * Check if you're out of fuel and fill the tank if needed. * Ensure the fuel shut-off valve is open. * Look for any mechanical jams in the blower rake or impeller. If there's an obstruction, turn off the engine, remove the key, wait for all moving parts to stop, and then remove the obstruction before restarting. * The fuel supply might be polluted; replace it with clean fuel. * The spark plug could be faulty; replace or clean it. * The fuel cap vent might be plugged; replace the fuel cap.
  • C
    Caitlin FranklinAug 25, 2025
    Why won't my Ariens 920014 COMPACT 24 LE operate in forward or reverse?
    • M
      Michael CookAug 25, 2025
      Your Ariens Snow Blower may not operate in forward or reverse due to: * A worn-out friction disc; replace it. * A malfunctioning traction belt; repair or replace it. * A speed selector that isn't adjusted properly; adjust it.

Summary

Introduction and Safety

Introduction to Manuals

How to obtain manuals in languages other than English and identify unit model.

Safety Guidelines and Precautions

Explains safety symbols, signal words, operator training, and safe practices.

Assembly and Setup

Package Contents and Tools

Lists package contents and required tools for unit assembly.

Handlebar and Chute Assembly

Step-by-step instructions for assembling handlebars and discharge chute.

Connecting Components and Pre-Operation Checks

Connecting wiring, cables, interlocks, and performing pre-operation checks.

Operation

Controls and Levers Operation

How to operate clutches, ignition, primer, speed selector, and throttle.

Snow Removal Techniques

Using clean-out tool, deflector, chute, and axle pins for effective snow removal.

Fueling, Starting, Shutting Down, and Transport

Filling Fuel Tank

Safety and procedures for filling the fuel tank.

Pre-Start Checks

Checking fuel, oil, clutches, impeller, and starting methods.

Starting Procedures

Manual and electric starting methods.

Shut Down, Emergency Stop, and Transport

Procedures for stopping, emergency shutdown, traveling, and transport.

Maintenance and Adjustments

Maintenance Schedule and Tasks

Recommended regular maintenance tasks and schedule.

Component Adjustments

Adjusting shear bolts, blade, shoes, clutches, cables, and speed selector.

Drive Belt and Friction Disc Replacement

Procedures for replacing drive belts and the friction disc.

Storage, Fuel System, and Service Parts

Storage Guidelines

Instructions for short-term and long-term storage of the unit.

Fuel System Care and Stabilizer

Fuel system maintenance, including adding fuel stabilizer.

Service Parts and Accessories

Information on ordering parts and available accessories for the unit.

Troubleshooting and Specifications

Troubleshooting Common Problems

Identifying and resolving common engine and operational problems.

Technical Specifications

Key technical data for the snow thrower models.

Warranty Information

Ariens Limited Warranty Details

Terms, periods, and coverage of the limited warranty.

Warranty Exclusions and Responsibilities

Items not covered, customer responsibilities, and service locations.

Emission Control Warranty Statement

Specific warranty for evaporative emission control systems.

Ariens 920014 COMPACT 24 LE Specifications

General IconGeneral
Product TypeTwo-Stage Snow Blower
EngineAriens AX 208cc
Clearing Width24 inches
Intake Height20 inches
Throw DistanceUp to 40 feet
Starting SystemElectric Start
Number of Forward Speeds6
Number of Reverse Speeds2
Impeller Diameter12 inches
Skid ShoesAdjustable
Auger MaterialSteel

Related product manuals