Ariens 921029 - Assembly

EN - 9
ASSEMBLY
Tools Required
•Pliers
• Open-End Wrenches: 3/8, 7/16, 1/2,
9/16" and/or Adjustable Wrench
• Tire Gauge
• Torque Wrench (Optional)
• Phillips Screwdriver
ASSEMBLY
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: Dropping or tipping over
boxed unit could result in personal
injury or damage to unit.
PACKAGE CONTENTS
Check the contents of your package for the
parts listed below (Figure 3):
Item Part No. Qty Description
The following parts are included as part of
the Sno-thro Unit:
1.
N/A 1 Sno-thro Unit
2.
07028500 2 3/8 x 3/4" Hex Head
Serrated Flange
Grade 5 Bolt
The following parts (3 – 6) are included as a
part of the Lower Handlebar:
3.
04584751 1 Lower Handlebar
4.
06221600 4 5/16 x 2-1/4" Round
Head Square Neck
Grade 5 Bolt
5.
07500005 4 Handlebar Spacer
6.
06545400 4 5/16" Nyloc Flange
Nut
7.
N/A 1 Upper Handlebar
Assembly
8.
N/A 1 Discharge Chute
Assembly With
Control
9.
04507700 1 Chute Crank Rod
10.
N/A 1 Literature Pack
11.
02483859 2 Skid Shoe, Reversible
(Models 921029, 040)
12.
06212000 4
Bolt, Round Head
Square Neck
3/8-16 x 1"
(Models
921029, 040)
13.
06435900 4
Washer, Flat Steel
7/16 x 1 x 5/64"
(Models 921029, 040)
14.
06529600 4
Nut, Locking, Center
3/8-16 (Models
921029, 040)
If any of the contents listed are missing
contact your local Ariens dealer. Use only
Ariens approved parts; unapproved parts
may void the unit warranty.
Figure 3
9
8
10
2
3
1
7
14
13
12
11
6
4
5