Need help?Do you have a question about the Ariens 936033 - 1542 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Deck Material | Steel |
| Cutting Width | 42 inches |
| Cutting Height Adjustment | Lever |
| Cutting Height | 1.5-4.5 inches |
Lists and illustrates various decals for the yard tractor.
Details components of the main frame and rear deck assembly.
Explains the rear wheel and hydrostatic drive system.
Diagrams and parts for the hydro transaxle unit.
Components related to the clutch and brake system for hydro models.
Parts for the hood, dashboard, and battery housing.
Components of the steering system.
Parts related to the attachment lift mechanism.
Components of the engine, fuel tank, and belt drive system.
Parts for the exhaust system, including muffler and pipes.
Parts for the 40-inch mower deck spindle.
Components for the 42-inch mower deck assembly.
Parts for the front mount of the 42-inch mower deck.
Parts for the 42-inch mower deck spindle.
Brackets and rollers for the 42-inch mower deck.
Hanger arms for 40 and 48-inch mower decks.
Components for the 48-inch mower deck and its rollers.
Parts for the 48-inch mower deck spindle.
Diagrams illustrating electrical continuity states.
Schematics for the tractor's electrical wiring system.
Components related to the operator's seat assembly.
Key structural parts of the main tractor frame.
Parts for deck support and height adjustment linkages.
Mounting components for the transmission.
Parts of the transaxle and its drive systems.
Components for transmission control and fluid handling.
Parts for the rear wheel and tire units.
Parts for the brake system and gear shifting mechanism.
Components and assembly of the hydro transaxle.
Parts for shifting gears and controlling the drive system.
Pedal assembly and support bracketry.
Primary housing and internal parts of the hydro transaxle.
Various bearings, seals, and shaft components.
Gears, sprockets, and related drive train components.
Parts related to the transaxle brake system.
Various hoses, fittings, and caps for the transaxle system.
Springs and tensioning components for the transaxle.
Assorted brackets, spacers, and washers.
Components for the brake control rod and lever system.
Parts related to the parking brake mechanism.
Components of the brake pedal assembly.
Parts for the dashboard, including controls and ignition.
Components for mounting the hood and battery.
Parts for throttle and choke control systems.
Parts for the tractor hood and its support mechanisms.
Switches for lights and cruise control functions.
Components for the headlight assemblies.
Brackets related to the steering system.
Components of the steering wheel and column assembly.
Bearings and washers for the steering column.
Components of the steering gear and its housing.
Parts for the steering linkage, rods, and arms.
Components of the front axle and wheel assemblies.
Components of the lift lever and quadrant mechanism.
Parts for the lift arm and pivot points.
Components for indicating and controlling deck height.
Gas springs and connecting links for the lift system.
Covers and hinge plates for the lift system.
Various clamps and retaining rings used in the lift system.
Parts and assemblies related to the engine.
Components of the fuel tank and fuel line system.
Parts for the engine belt drive system.
Components for the idler arm and pivot.
Parts for the engine oil drain system.
Various fuel lines, fittings, and connectors.
Bolts for engine mounting and idler components.
Components of the exhaust pipes and associated gaskets.
Parts for the muffler and exhaust deflector.
Heat shield components for the exhaust system.
Complete assembly and components of the 40-inch mower deck.
Sheaves and belts for the mower deck spindle system.
Components for deck adjustment and rollers.
Parts for the mower deck spindle housing.
Mower blades and hardware for attachment.
Components of the jackshaft and pulley system.
Complete assembly and components of the 42-inch mower deck.
Parts for deck reinforcement and cover plates.
Weldments for baffles and hinge plate components.
Braces and mounting components for the front of the mower deck.
Hardware, springs, and retainers for the front mount.
Components of the 42-inch mower spindle housing and shaft.
Belts, pulleys, tensioners, and associated hardware.
Mower blades, retainers, and related hardware.
Jackshaft, idler arm, and related components.
Various belts, sheaves, and tensioners.
Hardware for mounting mower blades.
Components for the lift linkage and support brackets.
Parts for the adjustment link and associated hardware.
Components of the hanger arms and connecting links.
Parts for adjuster links and associated hardware.
Complete assembly and components of the 48-inch mower deck.
Rollers and shafts for the 48-inch mower deck.
Front hanger and roller bracket components.
Covers and guards for the mower deck belt system.
Components of the rear hanger assemblies for the mower deck.
Parts for the mower deck chute and baffles.
Components of the 48-inch mower spindle shaft and housing.
Idler arm, pulleys, and tensioning components.
Hardware for mounting mower blades and retainers.
Drive components for the 48-inch mower spindle.
Hardware for mounting mower blades.
Diagrams showing key switch positions and continuity.
Continuity diagrams for seat and safety switches.
Continuity diagrams for light, relay, solenoid, and PTO.
Diagrams illustrating cruise control switch states.
Wiring for headlights, ignition, and related components.
Wiring for the engine, solenoid, and starter.
Wiring for safety switches, PTO, and cruise control.
To Next Page