Ariens Apex 52 Owner's Manual

EN - 38
Poor cutting
quality.
Mower blades not level or mower
deck pitch is incorrect.
Level and adjust pitch of mower deck.
See Level and Pitch Mower Deck on
page 35.
Mower blades are dull or faulty. Sharpen or replace mower blades. See
Sharpen Blades on page 22.
Mowing speed is too fast. Drive slower when cutting grass.
Belt tension or condition is poor. Replace mower belts. See Check Mower
Belts on page 24.
Cutting height is too low. Do not set height of cut too low. For very
tall grass, mow twice.
Blades do not
stop within 5
seconds.
Clutch brake plates worn. Reverse clutch brake plates. See Reverse
Clutch Brake Plates on page 32. If clutch
brake plates have already been reversed,
replace clutch.
TROUBLESHOOTING
Problem Probable Cause Correction

Ariens Apex 52 Specifications

General

Engine Brand	Kawasaki
Engine Power	23 HP
Cutting Width	52 inches
Transmission	Hydrostatic
Deck Material	10-gauge steel
Number of Blades	3
Engine	Kawasaki FR691V
Engine Displacement	726 cc
Speed	8 mph forward/4 mph reverse
Cutting Height	1.5 - 4.5 inches
Warranty	3 years