To Next PageTo Next Page
Need help?Do you have a question about the Ariens Front Tine Tiller and is the answer not in the manual?
General| Tine Location | Front |
|---|---|
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Warranty | 2 years |
| Tilling Width | 16 inches |
Safe operation practices for walk-behind tillers.
Steps to prepare the area and equipment.
Safe operating procedures and precautions.
Guidelines for upkeep and storage.
Fuel tank capacity and type.
Recommended oil type and viscosity.
Type and gap specifications.
Importance of following safety guidelines.
Following a consistent maintenance plan.
Adhering to maintenance and storage guidelines.
Critical notes on engine use and spark arresters.
List of tools needed for assembly.
Defining operator orientation.
Inventory of assembly hardware.
Instructions for unpacking and handle attachment.
Steps for assembling the depth stake.
Information on adjusting handle height.
Note on adjusting tilling width.
Checking tine operation before use.
Familiarization with tiller controls and symbols.
Function of the choke control.
Function of the depth stake.
Function of the fuel valve.
Function of the engine switch.
Function of the starter handle.
Function of the forward tine control.
Function of the throttle control.
Procedures for safely stopping the engine and tines.
Regulating speed and depth with depth stake.
Adjusting wheel position.
Safety precautions for moving the tiller.
Procedure for checking and adding engine oil.
Instructions for fueling the tiller.
Step-by-step guide to starting the engine.
Initial operation for belt and control break-in.
Advice for effective tilling and soil conditions.
Steps and tips for cultivating.
Table of regular service intervals.
Advice on warranty, adjustments, and general upkeep.
Checks to perform before operating.
Using quality detergent oil and viscosity grades.
Procedure for draining and refilling engine oil.
Instructions for cleaning the dual element air cleaner.
Keeping the engine clean for performance.
Replacing spark plugs.
How to clean the tiller safely.
Precautions regarding the muffler and spark arrester.
Steps to adjust the handle height.
Ways to arrange tines for different needs.
Assembling tines for 22" path.
Removing outer tines for 12" path.
Assembling tines for 24" path.
Checking tine engagement and disengagement.
Procedure for replacing the V-belt.
Adjusting the carburetor.
Cleaning, inspecting, and lubricating the tiller.
Draining and replacing engine oil.
Adding oil to the cylinder for storage.
Preventing gum deposits and managing fuel for storage.
Causes and corrections for engine not starting.
Causes and corrections for difficult starting.
Causes and corrections for power loss.
Causes and corrections for engine overheating.
Causes and corrections for handling issues.
Causes and corrections for soil clumping.
Causes and corrections for no tiller movement.
Causes and corrections for labored engine.
Exploded view and parts list for the handle.
Exploded view and parts list for belt guard.
Exploded view and parts list for wheels.
Exploded view and parts list for tines.
Exploded view and parts list for transmission.
Exploded view and list of decals.
What the warranty covers and how to claim.
Information on getting a parts manual.
Contact information for assistance.
