Quick Start Guide
Hydro Pro 36 (926055 s/n 101 & up)
• Step 1: Unfold Handlebar
• Step 2: Install Discharge Chute
• Step 3: Install Chute Control Assembly
• Step 4: Install Discharge Chute Rod
• Step 5: Install Remote Deflector Cable
• Step 6: Check Function of Dual Handle Interlock
• Step 7: Check Tire Pressure
• Step 8: Adjust Skid Shoes
• Step 9: Check Auger Gearcase Oil
• Step 10: Check Engine Crankcase Oil
• Step 11: Fill Engine Fuel Tank
• Step 12: Start Engine
• Step 13: Stop Engine
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
IMPORTANT: READ OPERATOR’S MANUAL AND ENGINE MANUAL
THOROUGHLY AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES
BEFORE OPERATING.
To Next Page
Need help?
General
