To Next PageTo Next Page
Need help?Do you have a question about the Ariens Pro 32 RapidTrak and is the answer not in the manual?
General| Engine | Ariens AX 420cc |
|---|---|
| Engine Type | 4-Cycle OHV |
| Engine Displacement (cc) | 420 |
| Clearing Width (in) | 32 |
| Intake Height (in) | 23.5 |
| Auger Material | Steel |
| Auger Diameter (in) | 16 |
| Impeller Diameter (in) | 14 |
| Throwing Distance | Up to 60 ft |
| Drive System | RapidTrak |
| Drive Type | Hydrostatic |
| Speed Settings | 6 Forward / 2 Reverse |
| Chute Material | Steel |
| Starting System | Electric/Recoil |
| Auger Type | Serrated Steel |
| Warranty | 3-Year Limited Consumer / 1-Year Limited Commercial |
Procedure for safely clearing a clogged discharge chute using a clean-out tool.
Guidelines for safely handling and storing fuel for the snow thrower.
Steps to remove the auger housing from the main frame of the unit.
Steps to remove the drive belts for the attachment.
Steps to install new drive belts for the attachment.
Steps to remove the drive belt for the traction system.
Procedure for removing the transaxle unit from the snow thrower.
Steps to safely remove the engine from the snow thrower.
Steps to remove the Engine Control Unit (ECU) from the unit.
List of replaceable EFI components and their locations.
Table identifying EFI trouble codes, their problems, and corrections.
Procedure for reading trouble codes displayed by the ECU's LED.
Detailed diagnostic steps for specific EFI trouble codes.
Troubleshooting steps for when the engine starts but immediately loses power.
Diagnostic procedures for an engine that fails to start.
