ARIETE 9020 - Specifications

Maintenance after using
lftheappliancewillnotbeusedforalong
time,besuretopullouttherubberplugof
the drain port underside, in order to drain
the water.
Before storing away run the unit in fan
mode only tor few hours to dry any mois-
ture on the coils to prevent mold.
Stop the appliance and pull out the power
supply plug, then take out the batteries
ofremotecontrollerandkeepitinasafe
place.
Cleantheairlterandreinstallit.
Removetheairhosesandkeepthemina
safe place and cover the hole tightly.
SPECIFICATIONS
Figuresnoted,inthecontentsareforreferenceonly;variationmayresultduetoapplica-
tionindi󰀨erentcountriesorregions,andshallbebasedonthebestofpracticaloperation.
Model 9020
Voltage/Frequency AC 220-240V~50Hz
CoolingPowerConsumption 1000W
Cooling capacity
2.5kW
RefrigerantType R290
Refrigerant amount
0.207kg
Timer 24 hour
Dimensions (W)x(H)x(D)
272x678x336mm
Weight 22,4kg
WorkingTemperature/Humidity(cooling) 16°C-35°C/30%-80%RH
Fuse
T3.15AL250V
Wiringdiagrama󰀩xedinsidetherearpanel
Wasteelectricalproductsshouldnotbedisposedofwithhouseholdwaste
38
EN