Ariston Thermo 12P CA-E - Technical Features; Overall Dimensions

47
GB
A M
B N
E
H
b1b2
B
F
G
C
D
78
ø 3/4"
ø 1/2"
3/4" G
d
c
e
1
TECHNICAL FEATURES
The heater is made up of:
• a tank protected inside by a layer of vitreous enamel, with a long-life anode for protection
against corrosion;
• an outer covering in painted steel;
• an insulation using high density polyurethane foam (without CFC) that reduces heat los-
ses;
• a fl ue gas hood to protect against the return of combustion products;
• a gas valve complete with:
an adjustable termostat with
a number of positions,
a safety system using a thermocouple,
a temperature limiter that stops the gas supply if operation is not correct;
• a circular low-noise stainless steel burner, adaptable for use with all types of gas;
• piezoelectric ignition;
• a safety device to protect against the return of fl ue gas.
OVERALL DIMENSIONS
CATEGORIA II
2H3+
Tipo B11 BS
FOR APPLIANCES PREPARED FOR FUNCTIONING WITH NATURAL GAS (METHANE) ADJUSTABLE FOR
FUNCTIONING WITH LIQUID GAS